Induction & Ceramic Built-In Cooktops: Installation Tips & General Guidelines
For the longevity of your appliance, it is crucial to properly install by following all the guidelines in the user manual. For detailed specifications about the appliance, please check its respective spec sheet.
Installation Tips for Induction & Ceramic Built-In Cooktops
For the purpose of this article, we will refer to the user manual of Linärie’s Toulouse LS80I2F1Z.
Cut out the work surface according to the sizes shown in the respective user manual. For best results of the installation and use, a minimum of 5 cm space shall be preserved around the hole. Be sure the thickness of the work surface is at least 30mm.
Please select heat resistant and insulated work surface material (wood and similar fibrous or hygroscopic material shall not be used as work surface material unless impregnated) to avoid the electrical shock and larger deformation caused by the heat radiation from the hotplate. The adhesive that joins the plastic or wooden material of the furniture, MUST be heat resistant of not below 150ºC.
The installation should comply with all clearance requirements and applicable standards regulations. A suitable isolating switch providing full disconnection from the mains power supply is incorporated in the permanent wiring, mounted and position to comply with the local wiring rules and regulations.
The safety distance between the hotplate and the cupboard above the hotplate should be at least 60mm. The rear wall, adjacent and surrounding surfaces must be able to withstand a temperature of 90°C. If the cooktop is installed above an oven, the oven must have a cooling fan.
You May Also Like:
|
Choosing the Right Cookware
In general, a cookware that is slightly wider, the heat will be distributed at its maximum efficiency. If a smaller cookware is used, heat distribution efficiency could be less than expected. Cookware that is less than 140 mm could be undetected; therefore, always center the cookware on the cooking zone.
How to know if the cookware is suitable for induction cooktops? When shopping for cookware, look for the ‘induction-compatible’ symbol at the bottom of the cookware, or use a magnet to test if it sticks to the bottom of the cookware; if it sticks, it’s compatible.
While induction cooktop requires specific types of cookware, on the other hand, all types of cookware suit ceramic cooktops.
You May Also Like: Cookware: Tips for choosing the right cookware for your ceramic & induction cooktop |
Induction vs Ceramic Cooktops
Read our blog about everything you need to know about Induction Cooktop or Ceramic Cooktop. You can also read our Induction vs Ceramic Cooktop blog to learn about the differences between Induction and Ceramic Cooktops and their advantages as we breakdown each type of cooktop, going over their pros and cons for you to consider before purchasing your next cooking appliance.
Bottom Line
This article aims to answer your questions about induction cooktops. If you're looking to buy a cooktop, check out the range of premium quality induction and ceramic cooktop available on Linärie Appliances. We provide quality and high energy-efficiency induction cooktop with 30-month warranty and various appliances to elevate your kitchen.
Looking to Speak with our Product Expert?
Pick a suitable time HERE for our product expert to give you a ring.
30-Month Manufacturer's Warranty
A 24-month parts and labour Manufacturer's warranty is included, giving you that extra peace of mind. Extend your warranty to 30-month when you register your product HERE.
About Linärie Appliances
Powered by innovative technology that combines premium quality with affordability, Linärie Appliances seamlessly integrates cutting-edge technology and French-inspired elegant designs, to elevate comfort in your kitchen and transform your cooking experience into memorable moments. Delivering anywhere in Äustralia.
0 comments